Weathershield Exterior Preservative Primer

One coat of primer will be applied by Phillips Joinery Ltd to seal your product.

Weathershield Exterior Undercoat

This flexible, quick drying undercoat is specially formulated to resist cracking, providing the perfect key for the top coat. Guaranteed to provide 6 year weathering durability, when used as part of the full Weathershield gloss system.

Application
Before application of undercoat, surfaces must be clean and dry. Stir undercoat thoroughly before use. Apply two or more coats of undercoat using a brush. A further coat may be required on primed wood or some dark colours. Do not use below 10oC, immediately after rain, fog or frost or when these conditions are forecast.

Drying time
2-4 hours

Weathershield Exterior Gloss

This high gloss finish is recommended for use on front doors and windows, which have received a primer and undercoat.

Application
Ensure surfaces are clean and dry before application. Stir product thoroughly before use. Finish with one or two coats of Weathershield Exterior Gloss using a brush. Some dark colours may need a further coat. Do not use below 10oC, immediately after rain, fog or frost or when these conditions are forecast.

Drying time
16 hours

Maintenance of coatings
For wood with flaking or blistering paint: remove all defective coatings, including grey, weathered wood, if necessary stripping back and sanding down to bare wood. Treat all knots and prime all bare wood with Weathershield Exterior Preservative Primer. Fill surface defects or open joints with appropriate Polycell Polyfilla product. Then apply undercoat and gloss as above.

Painted wood in good condition with no flaking or blistering paint: thoroughly sand down. Treat any mould, algae, lichen or moss with an appropriate fungicidal wash.

Back to Aftercare
Phillips Joinery Ltd, Airfield Industrial Estate, Ashbourne, Derbys DE6 1HA
Tel: 01335 343614 Fax: 01335 300674 email: andy.phillips@phillipsjoinery.co.uk
Sitemap | Joinery Manufacturer